OT-PLC302POE/OT-PLC302-DC is a reliable way to provide both Ethernet connectivity and power over longer distances—without excessive wiring. By combining network data and power over a single cable (two-wire, twisted pair, telephone, or power lines), it cuts down on hardware costs, reduces installation complexity, and supports seamless, energy-efficient operation in a wide range of environments.
Key Features & Benefits
1. Long-Distance PoE Transmission
● Extend PoE up to 500 meters
● Perfect for remote or sprawling installations that require both data and power over greater distances.
2. Easy Installation
● Mini-sized design for limited spaces.
● Plug-and-play configuration—no additional tweaks needed; simply connect and enjoy transparent data transmission.
3. Advanced OFDM Modulation
● Uses Frequency Division Multiplexing to transmit high-speed network signals and low-frequency power simultaneously on a single line.
● Complies with IEEE1901 and IEEE802.3af/at standards, ensuring stable communication and broad device compatibility.
4. Adaptive PoE Management
● Built-in PoE management chip auto-detects and adjusts power output based on the end-point's requirement.
● Receiver unit supports dual power inputs (DC or PoE port). For DC, choose 48–56 VDC; for PoE, connect via a PoE injector, PoE switch, or PoE NVR.
5. Safety and Reliability
● Power terminal polarity protection to prevent damage caused by reverse polarity connections.
● Standard Phoenix terminals and RJ45 network ports offer straightforward connections.
● PoE Video Intercom Systems: Power and data for entry panels or door stations over a single, long-distance cable.
● PoE Cameras: Deploy IP surveillance in distant or hard-to-reach locations without installing new power lines.
● Small-Form-Factor Networking: Perfect for limited-space enclosures where standard PoE equipment won't fit.
● Remote PoE Device Extensions: Extend PoE service for various IP devices—access control, monitoring terminals, or IoT sensors—across extensive properties.
Receiver
Transmitter
Point to Point
Point to Multi-point: Two Endpoint (Star)
Point to Multi-point: Three Endpoint (Star)
Point to Multi-point: Three Endpoint (Daisy Chain)
Point to Multi-point: Four Endpoint (Star)
Category | Description | |
Power Input (Receiver) | RJ45/PoE Input | Standard 48～56VDC; IEEE802.3af/at/bt |
DC Port Input | 48～56VDC | |
Power Consumption | ≤3W/PC | |
Power output (Transmitter) | RJ45/POE Output | Standard 48VDC; IEEE802.3af/at |
Power Consumption | ≤3W/PC | |
Ethernet | IEEE 802.3, IEEE802. 3u | Full duplex 100Mbps |
Physical Characteristic | Dimension (L×W×H) | Receiver: 120×104×28mm Transmitter: 123×26×26mm |
Material | Aluminum Alloy | |
Net Weight | Receiver: 225g Transmitter: 115g | |
Operating Environment | Working Temperature | -20℃～60℃ |
Working Humidity | ＜95% (Non-condensation) | |
